MAQUINA V3 CLASSC/LTD

МАКВИНА – классическая трех-плавниковая доска с отлично выверенной формой, которая никогда вас не подведет. Новая V3 версия представляет собой чистый серф-борд, самый тонкий линейке РРД. Супер-тонкий профайл в сочетании с тонкими бортами, помогает максимально контролировать доску даже при агрессивном катании на больших скоростях. Плоский закругленный хвост обеспечивает отличный сброс воды, позволяя серфить на доске при любых условиях катания.

ПРОГРАММА: PRO THRUSTER

КОМПЛЕКТАЦИЯ: доска (плавники и петли можно приобрести отдельно)

Особенности:
• Тонкие рейлы от носа до хвоста
• Супер-тонкие обводы
• Глубокий конкейв, плоский хвост, прогрессивный рокер
• Комплект из трех плавников позволяет делать радикальные повороты при любых условиях катания
• Закругленный хвост позволяет контролировать доску ногами, стоя на задней части доски

ТЕХНОЛОГИЯ:

Версия LTD - карбон.
The LTD construction was introduced last year. Built with a lightweight technology that allows flex, control and scooprockerline accuracy. The board is built with a CNC EPS core of 20 kgs/m3 density, then laminated with 200 grms biaxial glass fibers and finished with a 55 grams carbon net over a bamboo stepping deck vacuum glued onto the board at 90° compared to the stringer length so as to avoid excessive stiffness onto the board flex.
So this construction is slightly lighter than the Classic, about 300-400 grams, but the difference is not as much the weight, but it is stronger and has the EPS foam core. The EPS core makes the board more buoyant because the foam holds more air. The boards in the LTD construction feel alive, not only because of their light weight, but mainly due to the added floatation. Because of this it is possible to ride a thinner board. All of our LTD’s are thinner and tuned down from the Classic and Wood technologies. These boards were created specifically to ride strapless and are ideal for strapless freestyle. They are meant for riders that want a lightweight board that at the same time can be controlled at high speeds.

Версия WOOD - из деревянного сэндвича.
The Wood construction is a totally new technology used to create our boards. It is a very special process created with HDT (High Definition Technology). The boards are molded in one shot. This means that all of the fibers and lay ups are in the mold at the same time. The boards are then laminated with an infusion process. Infusion brings the resin into the mold from the nose and is pulled through the mold towards the tail. By building the board this way, it is possible to use the minimum amount of resin. Less resin makes the board lighter. Because this construction is less labor intensive, it is possible to get a quality board at a fair price. The Wood construction offers full wood on both the bottom and the top of the board(deck). The deck of the board has 90 degrees alignment of the fibers allowing for more flex compared to the bottom. Therefore, our Wood surfboards have a softer flex than most boards on the market that have bamboo.